110 lines
3.4 KiB
INI
110 lines
3.4 KiB
INI
#############################################################################
|
|
# Sample NRPE Config File
|
|
# Written by: Ethan Galstad (nagios@nagios.org)
|
|
#
|
|
# Last Modified: 12-30-2002
|
|
#
|
|
# NOTES:
|
|
# This is a sample configuration file for the NRPE daemon. It needs to be
|
|
# located on the remote host that is running the NRPE daemon, not the host
|
|
# from which the check_nrpe client is being executed.
|
|
#############################################################################
|
|
|
|
|
|
|
|
# PORT NUMBER
|
|
# Port number we should wait for connections on.
|
|
# NOTE: This must be a non-priviledged port (i.e. > 1024).
|
|
# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
|
|
|
|
server_port=5666
|
|
|
|
|
|
|
|
# SERVER ADDRESS
|
|
# Address that nrpe should bind to in case there are more than one interface
|
|
# and you do not want nrpe to bind on all interfaces.
|
|
# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
|
|
|
|
#server_address=192.168.1.1
|
|
|
|
|
|
|
|
# ALLOWED HOST ADDRESSES
|
|
# This is a comma-delimited list of IP address of hosts that are allowed
|
|
# to talk to the NRPE daemon.
|
|
#
|
|
# NOTE: The daemon only does rudimentary checking of the client's IP
|
|
# address. I would highly recommend adding entries in your
|
|
# /etc/hosts.allow file to allow only the specified host to connect
|
|
# to the port you are running this daemon on.
|
|
#
|
|
# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
|
|
|
|
allowed_hosts=127.0.0.1
|
|
|
|
|
|
|
|
# NRPE USER
|
|
# This determines the effective user that the NRPE daemon should run as.
|
|
# You can either supply a username or a UID.
|
|
#
|
|
# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
|
|
|
|
nrpe_user=nagios
|
|
|
|
|
|
|
|
# NRPE GROUP
|
|
# This determines the effective group that the NRPE daemon should run as.
|
|
# You can either supply a group name or a GID.
|
|
#
|
|
# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
|
|
|
|
nrpe_group=nagios
|
|
|
|
|
|
|
|
# DEBUGGING OPTION
|
|
# This option determines whether or not debugging messages are logged to the
|
|
# syslog facility.
|
|
# Values: 0=debugging off, 1=debugging on
|
|
|
|
debug=0
|
|
|
|
|
|
|
|
# COMMAND TIMEOUT
|
|
# This specifies the maximum number of seconds that the NRPE daemon will
|
|
# allow plugins to finish executing before killing them off.
|
|
|
|
command_timeout=60
|
|
|
|
|
|
|
|
# COMMAND DEFINITIONS
|
|
# Command definitions that this daemon will run. Definitions
|
|
# are in the following format:
|
|
#
|
|
# command[<command_name>]=<command_line>
|
|
#
|
|
# When the daemon receives a request to return the results of <command_name>
|
|
# it will execute the command specified by the <command_line> argument.
|
|
#
|
|
# Unlike Nagios, the command line cannot contain macros - it must be
|
|
# typed exactly as it should be executed.
|
|
#
|
|
# Note: Any plugins that are used in the command lines must reside
|
|
# on the machine that this daemon is running on! The examples below
|
|
# assume that you have plugins installed in a /usr/nagios/libexec
|
|
# directory. Also note that you will have to modify the definitions below
|
|
# to match the argument format the plugins expect. Remember, these are
|
|
# examples only!
|
|
|
|
command[check_users]=/usr/nagios/libexec/check_users -w 5 -c 10
|
|
command[check_load]=/usr/nagios/libexec/check_load -w 15,10,5 -c 30,25,20
|
|
command[check_disk1]=/usr/nagios/libexec/check_disk -w 20 -c 10 -p /dev/hda1
|
|
command[check_disk2]=/usr/nagios/libexec/check_disk -w 20 -c 10 -p /dev/hdb1
|
|
command[check_zombie_procs]=/usr/nagios/libexec/check_procs -w 5 -c 10 -s Z
|
|
command[check_total_procs]=/usr/nagios/libexec/check_procs -w 150 -c 200
|